EDEL+WHITE FlosserPik

Description

Edel+White Flosserpik Dental Water Jet Cleaner

EDEL+WHITE FlosserPik

Product details

• Water jet cleaner or water flosser helps clean around the teeth and gum line better. It has a 2-stage cleaning system consisting of:
  • High pressure water flow, water jets are sprayed in a rhythmic manner
  • Brushing teeth with the UltraSoft Konex HD® toothbrush
• FlosserPik water flosser removes food particles from between teeth with high-pressure yet gentle water that is safe for gums and teeth. It helps clean between teeth more easily with confidence with Swiss technology.
• The water pressure is high, but the water droplets are of the right size, so the water does not hurt the gums. In addition to not hurting, it also feels like the gums are being massaged.
• The device works wirelessly with a built-in battery.
• Waterproof features, can be used in the bathroom completely, safe even while taking a shower with IPX7* standard or wash the device without worry.

*(IPX7 can prevent water from entering the device if it is immersed in water up to 1 meter deep for up to 30 minutes.)

• 4 types of nozzles provided
  • The UltraSoft Brush Nozzle removes food particles and plaque simultaneously with two mechanisms: one is a high-pressure jet of water to remove food particles, and the other is a tufted brush at the tip of the brush nozzle to remove plaque.
  • The Jet nozzle is a standard water nozzle that works by one mechanism: to remove food particles from between teeth or food particles stuck in braces. It is suitable for those who only want to deal with food particles and already have a regular flossing routine.
  • Subgingival nozzle or nozzle for injection under the gums. This extra-small head is designed to clean under the gums for people with gum disease or periodontitis. This nozzle must be used with the lowest working mode and should be advised by a doctor before use.
  • Tongue cleaner nozzle helps to balance bacteria and freshen breath. It is more effective when used with mouthwash.

• FlosserPik is safe to use with mouthwashes to make oral care more effective, such as Chlorhexidine Mouthwash to treat mouth ulcers or infected areas. The Jet Tip and Spot Clean mode (press and hold to spray, release to stop) allow users to target the desired area with precision and prevent unnecessary mess.
• Thorough cleaning of the unit The FlosserPik’s water tank can be cleaned by removing the cover on the bottom of the unit, which provides access to the entire tank area, allowing for a thorough cleaning, eliminating the problem of germs and mold build-up. This is one of the reasons why the FlosserPik can be used with mouthwash without any problems with the unit.
• Charge once and use 30 times.
• Designed for ease of use, fits in the hand, and sucks water consistently without getting stuck.
• 2 years warranty

The box contains:

• FlosserPik Machine
• 4 types of water nozzles: UltraSoft, Jet, Subgingival, Tongue Cleaner
• USB charging cable (no adapter)
• Towel for storing the device and brush head while traveling
• Instruction Manual

Specifications

• This device complies with European Union directives (EMC/RoHS).
• Uses a rechargeable Lithium-ion battery. When the battery is fully charged, it can be used 30 times for 2 minutes each time in Active mode.
• Charging mode: DC
• Battery charging time from 0-100 takes 6 hours.
• 4 working modes: Active, Sensitive, Pulse and Spot Clean
• Can hold 180 ml of water at a time.
• Waterproof to IPX7 standards
• Material: ABS (body), PC (water tank), PMMA (nozzle)
• Suitable environment temperature is 0-50°C (under standard atmospheric pressure), can be used at altitude below 5000 meters.

Product features

• Helps remove stains around teeth and under the gums.
• Helps reduce the risk of bacteria buildup in small crevices, cleans deeply along the gumline and reaches hard-to-clean areas, especially for those with dental implants, bridges and braces.

Method of use

Ingredients

1. Nozzles: Available in a variety of styles to suit your cleaning needs.
2. Nozzle retaining ring: Helps keep the nozzle firmly attached to the machine.
3. On/Off and operation mode selection button: Conveniently control the operation of the machine.
4. Main body: The part that is held during use
5. Nozzle release button: Allows easy nozzle replacement.
6. Charging port: For charging the battery.
7. Water tank cover: Prevents water from spilling and dirt from entering the tank.
8. Bottom cover release button: To access the internal parts of the device.
9. Suction pipe: Brings water from the tank into the injection system.
10. Water tank: Contains water for use.
11. Filter: Filters out impurities from water.
12. Bottom cover: Protects the internal parts of the machine.

Inserting the injector

1. Insert the nozzle into the center of the handle (see picture 1).
2. Try pulling the nozzle gently to make sure it is locked into place (see Image 2).

Removing the injector

1. Press the injector release button (see picture 3).
2. Pull out the nozzle at the same time (see picture 4).

Filling the water tank

1. Open the water tank cover by holding the device horizontally.
2. Fill the tank with water.
3. Close the tank cap tightly (see picture 5).

note

• Use water with a temperature not exceeding 40 degrees Celsius.
• Do not put salt or toothpaste into the tank.
• Before first use, rinse the tank with clean water, then fill it with water, point the nozzle toward the sink, and press the power button to clean. Repeat until the water in the tank is empty to ensure that the machine is clean and ready to use.

Before first use, charge correctly and safely.

• For charging, make sure the product and your hands are completely dry, then connect the USB charging cable to the power adapter and plug the power cord into an electrical outlet (Figure 1).
• Plug the USB charging cable into the charger and make sure it is plugged in tightly (Picture 2).
• If the red indicator light flashes after use or the device cannot be turned on, it indicates that the battery has insufficient charge and needs to be plugged in to charge (Figure 3).
• It takes 5-6 hours to fully charge.
  • While charging, the green light will flash slowly.
  • When charging is complete, the green light will remain on.
  • When the battery is full, charging will automatically stop to prevent overcharging.

How to use a water flosser

• Do not turn on the device before placing the nozzle in your mouth.
• Bend over the sink and hold the handle and bring the nozzle to your mouth.
• Press the power button to start working. Close the nozzle slightly to prevent water from splashing.
• Position the water jet at a 90° angle to the teeth and gums.

• Press the button repeatedly to switch between Active, Sensitive and Impulse modes.
• The device will remember the last selected mode and use that mode next time.
• You can turn off the device by pressing and holding the button after 4 seconds of use.
• Spot cleaning is done by pressing and holding the button, aiming the nozzle at the area to be cleaned, pressing and holding the button while the machine is off, the machine will operate in Sensitive mode, when releasing the button, the machine will turn off.

Specific functions are as follows:

• Active mode High pressure water hose The LED will light once and remain on during use.
• Sensitive mode, gentle water pressure, LED light will glow white twice and remain bright during use.
• Pulse mode 3 pulses per second, the LED will light three times and remain on during operation.
• Spot Clean mode: Continuous water flow while holding down the button. When releasing the button, the water stops flowing.

 

How to terminate usage

• The automatic shutdown system will shut down the device after 2 minutes of operation.
• Turn off the device by pressing and holding the power button until it turns off.

Water flosser usage techniques

• Press the on/off button repeatedly to cycle through the different operating modes. The Flosserpik remembers the last selected mode, eliminating the need to select it again for the next use (memory function).

Water injection

• Close your mouth slightly to prevent splashing. Point the water stream at a 90° angle to your gum line.
• Slide the nozzle slowly along the gum line when finished.
• Turn off the device by pressing the on/off button on the base and empty the water tank.

Cleaning braces

• Using a soft-bristled brush head, follow the technique recommended below to clean around each braces tooth.

Brushing your teeth with the KONEX HD® Extra Soft Toothbrush

• Insert the brush head into the handle and brush your teeth as usual. After brushing, rinse your mouth with water.

Subgingival injector

• Designed for comfort, the soft rubber tip delivers a concentrated stream of water or disinfectant that reaches deep into the gumline.

NOTE: This nozzle is not designed for general use and must be used in Sensitive mode only. Place the soft tip against the tooth and gently insert the tip slightly below the gum line. Clean by sliding it gently along the gum line. Insert the tip between the teeth. Repeat in all areas of the mouth.

 

Recommended time to replace injector

• Dentists recommend replacing your brush head every 3 months and any other nozzles every 6 months.

Using mouthwash and other solutions

• Flosserpik can be used with alcohol-free and essential oil-free mouthwashes for general use.

Note: Using certain types of detergents may shorten the life of the machine. If not cleaned properly, the machine must be thoroughly rinsed after using any detergent. Fill the tank with warm water to the minimum level, then point the nozzle down into the sink and turn on the machine until the water in the tank is empty.

Advice

• Please read this manual to learn how to use the device correctly and safely to prevent any possible dangers from this device before use.

Cleaning and maintenance

• Cleaning the device: Clean with a dry cloth or a damp cloth.
• Cleaning the water tank: Wipe with a wet or dry cloth and rinse with clean water. If not used for a long time, let it dry completely before storing.
• To clean the nozzle, use a wet or dry cloth to wipe it, or remove the nozzle, rinse with water and wipe it dry before reinserting. Do not bend, pull or twist the suction pipe.

• Open the cleaning port cover with the release button (Fig. 1-3). Do not open while filling with water.
• Make sure the cover is tight when replacing (Figure 3-1).
• Gently rinse the product with water before use. Clean the product every 6 months if it has not been used for a long time. Clean the device with clean water or a little soap. If the water in your area is hard, clean the device regularly with a little vinegar.
• Do not use abrasive or corrosive cleaning agents.
• Do not use water hotter than 40°C.
• Do not put in dishwasher.

Shop for good health 24 hours a day.

LINE OA @HealthyMax