Hill-Rom Centruris Type-D

Hill-Rom Centuris Type-D Nursing Bed with Mattress

Hill-Rom Centuris Type-D

(Free shipping! Bangkok and Samut Prakan)
(only on the ground floor of the house)

Features

• The bed is equipped with 4 electric motors to control all the different postures.
  Through a control unit mounted on the top of the bed rails on both sides, totaling 4 points (inside and outside).
• The bed can be adjusted in height, adjust the back support up and down. Can adjust the part of the knee support up and down, adjust the high head, low feet/high feet, low head with electric motor
• Control unit on rear outer bed rail For nurses, they can control the positioning of the bed. High-low adjustment Adjusting the back up and down
  knee adjustment and adjusting the high head, low feet/high feet, low head position and can lock the single lock control with separate functions.
• Control unit on rear inner bed rail For patients, the position of the bed can be controlled only by adjusting the back up and down.
  knee adjustment for patient safety
• The rear side rails have a gauge indicating the slope of the back support and there must be a clear indication that the back support is raised at the 30 degree position.
• There is a gauge on the leg side rails to tell you the degree of the slope of the bed base. (Trendelenburg / Reverse Trendelenburg)
• The head of the bed can be easily removed. without a lock button or the need for tools to remove
• The bed has a spare battery which can stand by for up to 1 week.
• The bed has 4 wheels and can be moved and locked by foot pedals.
• The bed has a Manual CPR system for emergency situations.
• When pressing and holding the back up adjustment button for about 5 seconds, the bed will automatically adjust auto contour.

Product details

• The Hill-Rom electric bed, Centuris Type D, has 4 wheels, can be moved and locked by a central lock pedal
• It is a bed for use in patient rooms and critically patients.
• The bed base is divided into 4 parts, namely the back, the hips, the knees and the feet, which are controlled by an electrical system.
  Manage your pose with the controls on the side railings. There are separate side railings between the back and legs.
• The bed has 4 wheels that can be moved. and can be locked when wanting the bed to remain stationary with 4 independent wheels
• The cushion of the bed can prevent liquid from seeping through. And can be lifted out for cleaning
• The mattress base is made of rust-free steel.
• Use with electricity 220 volts with backup battery when power failure.
• The bed has passed the following international safety standards:
• CE
• IEC/EN 60601-2-52
• HBSW
• IPX4 – According to IEC 60529
• Product warranty time is 1 year.

Technical features

1. The bed is not less than 2000 mm long.
2. The bed width is not less than 1000 mm.
3. The bed can be adjusted up to a maximum of 765 mm.
4. The bed can be adjusted to a minimum of not more than 465 mm.
5. The back support can be adjusted up to at least 65 degrees.
6. The back support can be adjusted up to at least 65 degrees.
7. Can adjust the pose of high head, low feet / high feet, low head no less than 12 degrees.
8. The bed’s wheels are not less than 125 mm.
9. The height between the floor and the lowest point of the bed when the bed is in the lowest position is not less than 135 mm.
10. The bed can bear a weight of not less than 204 kg.
11. The bed can add an additional 100 mm of foot bed extension.
12. The bed, without mattress, weighs no more than 150 kg.

Features of mattress pads

1. Mattress cushions are made from Hospital Grade Foam that has properties to prevent the growth of bacteria and fungi. (Anti-Microbial Treated Foam)
2. The mattress cover is made of Nylon and is polyurethane coated for easy cleaning and maintenance.
3. The mattress cover is designed to prevent the penetration of liquids (Enclosed Design) for cleanliness.
4. Certified to Cal 129, CPSC 16CFR1633 and Boston IX-IL fire spread standards.

How to use

• The Hill-Rom Centuris Type D Electric Patient Bed controls all posture operations via a built-in control unit mounted on the top rail of the bed.

Hospital Branch
, 3rd floor, Zone A, Health Care Equipment Center

Call Connect : 0-2411-2554

Branch, 5th Floor, Medicines and Health Promoting Products

Call Connect : 0-2288-0988

Shop for good health 24 hours a day.

HealthyMax Club